About SNMP monitoring
When you’re setting up and configuring your SNMP monitoring, it can be useful to be able to test some of the functionality before you start applying it to your devices.
For example, you might want to confirm that the SNMP response to a specific Object Identifier (OID) comes in the format that you expect, or that a device can actually be connected to over UDP port 161 by your network node device.
To test this, you can use the Datto RMM Agent on the network node device to test out SNMP monitoring and connectivity.
You should be familiar with the process of how to nominate a device as a network node device and how your network devices can be discovered and managed by a network node. For further information on this, refer to Network discovery.
If you are not familiar and comfortable with the concepts, terminology and technology around SNMP, please refer to the guides we collected in the topic referenced above. This document assumes that you know the SNMP OIDs (Object Identifiers) that you want to monitor, and the thresholds / values that you want to monitor for. You may find out more about the SNMP OIDs from the device vendor or from the device documentation.
- Log into the Agent Browser. For more information, refer to Log into the Agent Browser.
- Search for and connect to the device you have nominated as a network node. For more information, refer to Connect to a device.
The SNMP Test Tool is only available for network node devices. For more information, refer to Network discovery.
- Once your network node appears in the Connected Devices area, select it to activate the Agent Browser tools. Refer to Agent Browser tools.
- Click on the Test network devices using SNMP icon . This will bring up the SNMP Test Tool tab.
- Enter the network device details in the bottom left window.
|Device Name||Enter the name of the device you wish to monitor (e.g. Cisco router).|
|IP Address||Enter the internal IP address of the device.|
|SNMP version||Choose SNMP version v1, v2c, or v3. If you are connecting over SNMP v3, you will also need to populate the required authentication details. For further information, refer to SNMP Credentials.|
|Community||The community string works as a password. Enter the community string of your device.
The default read-only community string is "public" but your device may have a customized community string.
- Click Save to add the device. It will now show up in the top window.
- Click the Add icon in the bottom right window to add an SNMP OID to be monitored or to test if the device is offline.
- Click Save.
- Repeat steps 7-8 for any additional OIDs that you want to monitor.
- Once the monitor has been applied to the network node (up to about 30 seconds), the result will be shown in the monitor in the bottom right window. Under the Value column, a green status bar will show that the current SNMP value is within your configured thresholds, while a red one will show that it is outside of an acceptable value.
|Need to troubleshoot this? Open the Datto Knowledge Base.|
|Want to talk about it? Head on over to our Community Forum!|
|Forward this topic to others.|
|Provide feedback for the Documentation team.|